產品參數：

添加產品相關信息模內攻牙機LFT-1K/G性能特點：
◆設計在自動連續沖模或級進沖模模內同步攻牙，性能穩定。
◆速度快最高值可達600孔/每分鐘，效率高。例如一次攻6孔X80PM可達480孔每分種。
◆多向攻牙，可分為有上向下，有下向上，水平方向及獨立攻牙，滿足不同模具要求。
◆攻牙頭可更換，一機多用，更換絲維安全迅速。
◆多孔攻牙，在不同牙距與牙距之間，同步多孔完成攻牙（最多可6孔）視牙徑而定。
◆攻牙范圍，公制，英制，絲錐皆可。
◆可依客戶要求，提供專用攻牙機攻牙機數量無限制，單機最大可攻12孔。
◆可攻盲孔與一般通孔，尺寸精確，攻牙品質佳特點。
◆精巧外型，占模具空間小，不影響模具成本，安裝設計方便。
◆各品牌絲攻均可適用。
◆設計彈性大，標準與專用機規格型號眾多。

Performance characteristics：
◇The design of automatic continuous die or progressive die in the synchronization of tapping, stable performance.
◇Speed up to 600 holes / minute, high efficiency. For example, an attack on the 6 hole X80PM up to 480 holes per minute.
◇Multi direction tapping, can be divided into up and down, up and down, horizontal and independent tapping, to meet the requirements of different molds.
◇Tapping head can be replaced, the use of a machine, replacing the fibers safely and quickly.
◇Porous tapping, in the distance between the teeth and the distance between the teeth, the completion of the synchronized porous tapping (up to 6 holes) depending on the size of the teeth.
◇Tapping range, metric, inch, taps are available.
◇According to customer requirements, the number of special tapping machine tapping machine is unlimited, the largest single attack 12 holes.
◇Can be used to attack the blind hole and the general through hole, the size is accurate, tapping the good quality characteristics.
◇Compact appearance, accounting for small mold space, does not affect the cost of mold, easy installation and design.
◇Each brand can be applied to tap.
◇Design flexibility, standard and special machine specifications and models.